Disposable Fiberglass Panel Filters
Heavy-duty one-piece frame is bonded to industrial grade media with either metal retainer grill or scrim on one side. Available in 1/2", 1" and 2" nominal thicknesses. Also available in a polyester media version.
  Product Brochure



Pleated Panel Filters

Filter offers significantly higher efficiencies, longer life and better dust holding capacities than conventional flat panel filters. 

  • Moisture resistant - 100% synthetic media.
  • Extended surface filters are available in many efficiencies, capacities and thicknesses.
  • Premium grade meets the ASHRAE 52.2 MERV 11 standard.  
  Product Brochure  

STD Capacity Submittal

High Capacity Submittal

Series 1100 Submittal



Novapleat® is the next generation of extended surface pleated filters. The construction process is automated ensuring consistent quality and uniform appearance and performance.

  • Precision machine fabrication for consistent quality
  • Square pleat tip provides added rigidity making filter extremely durable
  • High Capacity model available Center support strut eliminates breaching
  • 100% metal free design 
  Product Brochure  



Green Pleat

Green Pleat is specifically designed to meet the air filtration efficiency criteria required to gain points toward the LEED certification rating system.

  • Constructed with an advanced synthetic air media
  • Utlizes both charged fibers and traditional mechanical filtration principals
  • Low resistance to air flow reduces energy costs
  • Eliminates need to retrofit to achieve MERV 13 efficiency
  Product Brochure  



Polyester Media Rolls and Pads

Premium commercial and industrial grade media provides extra protection for HVAC coils and equipment.

  • Wide variety of widths, thicknesses, lengths and media grades 
  • High efficiency media is available in a variety of sizes
  Product Brochure  



Automatic Roll Filters

Fiberglass and polyester media are both offered in a variety of grades and styles.

  • Heavy-duty paper trailers and leaders are standard for easy Installation and disposal
  • Standard 45' and 65' lengths 
  • Universal replacement for all makes and models
  Product Brochure  



Panels and Links Filters

High loft synthetic filter media heat-sealed around an internal wire frame.

  • Wide variety of media grades, efficiencies and layers
  • Available as panels or connected links
  • Self-gasketing perimeter 
  • Rust resistant galvanized wire
  Product Brochure  



Cube Filters

These medium efficiency synthetic filters offer high dust-holding capacity and a self-sealing perimeter.

  • Galvanized steel header is optional 
  • Unitized cube construction
  Product Brochure  



SoniQ® Pocket Filters

Extended surface medium and high efficiency bag-type air filters are available in four efficiencies, a wide variety of sizes and pocket configurations.

  • Ultrasonic welding technology 
  • Open throat design for optimum air flow 
  • Galvanized steel header and J-channels for filter strength 
  • UL 900 Class 1 optional
  Product Brochure  



Rhino Pocket Filters

The Rhino Pocket is a high efficiency air filter utilizing a stiff, extremely durable synthetic media which is constructed using heavy duty stitching to ensure proper inflation and performance during entire life-cycle.

  • Holes are sealed with an adhesive providing more support and eliminating air by-pass 
  • Replaces flimsy fiberglass and synthetic pocket filters 
  • Built for long life applications
  Product Brochure  



ASHRAE Cartidge Filters

Features include high dust holding, with moisture resistant media and traditional 12" depth.

  • Available in three efficiencies and a wide range of sizes 
  • Header is standard, high temperature models available 
  • Galvanized steel frame provides exceptional strength
  Product Brochure  




Geopleat® provides a high level of filtration in a wide variety of applications.

  • Robust media resists tears, punctures, moisture and microbial growth. 
  • Media pack is adhesively bonded on all four sides. 
  • Advanced pleat geometry provides even dust loading, maximum service life and lower energy costs 
  • Available in a variety of frame materials and styles 
  • Lightweight compact design
  Product Brochure  



Titan FP® Filters

Titan FP® is a high efficiency, state-of-the-art rigid design filter that is lightweight, rugged and easy to handle.

  • Built-in handle 
  • Available in MERV11, MERV13 and MERV14 
  • Can replace bag and box style filters
  Product Brochure  



FP Filters

The Aerostar® FP Series fine dust filter is recognized worldwide as the most proven and reliable high technology air filter on the market. Our mini-pleat V-Bank™ technology has proven to be cost effective and highly efficient in removing a wide variety of contaminants from the air stream in industrial, medical, office and original equipment applications.

  • Longer filter life with lower replacement and maintenance costs 
  • Eliminates downstream dust and fiber shedding 
  • Reduced resistance to air flow promotes significant energy savings 
  • Dual direction media for front or reverse mount installations
  • No aluminum spacers to damage the filter media
  • Plastic frame creates an exceptionally strong yet lightweight filter
  • Built-in handle eases transportation and installation
  • Sustainable component for a LEED/Green Building initiative

  Product Brochure


Nexfil® High Efficiency Mini-Pleat Air Filter

The Aerostar® Nexfil® high efficiency mini-pleat air filter is specifically designed to provide high levels of air filtration efficiency to remove pollens, molds, dust, and other airborne irritants. Nexfil filters can greatly increase indoor air quality by removing these fine particles from the air. The high level of efficiency protects humans, ductwork, cooling coils, as well as any vulnerable items in the conditioned air space.

  • Advanced media and design provide high efficiency filter in a compact design
  • 100% synthetic media and frame
  • Removes pollen and airborne irritants from HVAC system
  • Protects humans and equipment from airborne dust
  • MERV 15 Nexfil removes over 85% of particles 0.3-1.0 micron size from the airstream
  • Durable construction eliminates damage during handling and installation
  • Available in multiple sizes and no system modification required
  • Low resistance to air flow saves energy costs
  • Long service life

  Product Brochure


Rigid Cell Filters

Rigid design is not affected by variation in air flow. Commonly used in both side access and built-up filter banks.

  • Extended surface pleat construction is available in many efficiency ranges with or without a header 
  • Synthetic and fiberglass media options
  Product Brochure  



HEPA and ULPA Filters

Filters are used when the highest possible degree of air purification is necessary.

  • HEPA and ULPA efficiencies available 
  • Wide variety of sizes and configurations
  Product Brochure  



M-Series HEPA and HEPA HC

Designed for value, versatility and performance. Low operating cost. Durable, low weight, and easy to install.

  • Mini-pleated using wet laid glass media 
  • Available in three efficiencies on 0.3 micron particles 
  • Low pressure drop reduces energy consumption and lowers operating cost 
  • High strength, low weight 
  • Recessed pack allows easy handling
  Product Brochure  



HV (High Volume) HEPA Filters

Extremely rugged compact construction offers 366 sq. ft. of effective filter surface area in a durable frame.

  • Pressure drop of 1" w.g. at 2,400 CFM 
  • Available in HEPA efficiencies (99.97% and 99.99% at 0.3 micron)
  Product Brochure  



Filtrair® Rigid Pockets

Constructed with a 100% synthetic fiber media to ensure high-depth loading with low pressure drop. These filters combine three sequential progressive density layers

  • Injection molded plastic header ensures leak-free design 
  • Rigid pocket design maintains optimum form 
  • Full adhesive saturation through a proprietary process prevents unloading 
  • Thermal Pocket (TP) filter with metal header available in 45% and 65% efficiencies



Filtrair® Optipleat

Provides low resistance to air flow while maintaining high
efficiency levels. Patented design of the
Optipleat pack utilizes a unique supported deep pleat with
10mm wide air entry pleat throat. Media is a special blend of synthetic and glass fibers.

  • Design minimizes resistance to air flow 
  • Resistant to deformation and media puncture 
  • No metal parts allows total incineration 



Filtrair® FMV

Extremely durable and designed to withstand rough handling and hostile environments. Plastic frame is impervious to moisture and dust while making the filter lightweight.

  • Exceptionally low resistance to air flow 
  • Absence of metal components eliminates the possibility of corrosion 
  • Edge banded pleating process eliminates the need for glue separators



Cleanroom Filters

Comprehensive product line includes cleanroom panels, replaceable and ducted modules.

  • Available in HEPA and ULPA efficiencies 
  • Durable extruded aluminum frame 
  • Gas phase and high efficiency complimentary filters available

Cleanroom Panels Brochure

Replaceable Terminal Modules





Corrugated aluminum separator design with sturdy galvanized steel, aluminum or wood frames.

  • Available in HEPA and ULPA efficiencies 
  • 100% of filters subject to an efficiency and initial resistance test 
  • Custom sizes and configurations
  Product Brochure  




We offer a wide variety of gas sorbent products and can custom design a filter to meet your specific needs.

  • Products utilize a variety of media types, brands and grades 
  • Wide range of sizes, configurations and sorbent levels 
  • HEGA Dual-Pak is a dual-stage filter consisting of a pleated particulate first stage media along with a second stage gas removal media

HEGA Dual Pack Brochure

HEGA Gas Phase Brochure



Holding Frames and Clips

All holding frames are provided with pre-punched mounting holes that are self-aligning for quick and easy assembly.

  • All common styles of filter clips are available.
  • Pad holding frames are made of durable galvanized metal. 
  • Available in 1/2", 1" and 2" thicknesses. 
  Product Brochure  



Filtrair® Sentinel Fan

The Sentinel Fan is designed for optimum performance, low noise levels and energy savings in filtration applications.

  • Variable speed switch for air volume control 
  • Motor’s low power draw reduces energy consumption 
  • Low profile design allows for installation with minimum overhead space 
  • Available in standard lay-in ceiling units and room side serviceable 
  • HEPA and ULPA available
  Product Brochure  



Filter Housings

Our comprehensive housing line from single stage pleated, dual stage, v-bank to HEPA allows us to offer customers a high quality, broad selection of filter housings.

  • Custom sizes available to fit many applications 
  • Housings are constructed in a wide range of materials, from galvanized to 304 stainless steel



Bag in/Bag Out Housing

The HEPA BIBO Housing is a single or multistage unit designed to hold HEPA filters with either a gasket or fluid seal.

  • 304 stainless steel construction meets all ASTM specifications 
  • Bubble tight dampers with manual electric or pneumatic actuators 
  • Upstream and downstream test sections 
  • Built under NQA-1 Quality Assurance Program 
  • Locking mechanism secures seal between filter and housing
  Product Brochure  



Isolation Room Containment System

The IRCS is a self-contained unit designed to meet the CDC’s guidelines by providing high-efficiency filtration for small contamination or hazardous areas.

  • Consists of a HEPA bag in/bag out housing and a dedicated fan unit 
  • Stainless or aluminized steel housings, custom sizing available 
  • Locking mechanism provides secure seal between filter and housing
  Product Brochure  


©2020 Air Filter Engineers and its licensors.

Website Powered by Web Construction Set