Air Filter Engineers, Inc.

Exhaust Cleaner Overspray Media

DESCRIPTION
These overspray media are designed to collect overspray from your paint or finishing operation. With typical transfer efficiencies will below 100%, most paint booths will exhaust a good portion of the spray. To keep this overspray off the stack and stack fan, or even the outdoors, you need an overspray media with plenty of holding capacity and high removal efficiency. These media are installed in the path of the exhaust air flow so that only clean air is exhausted into the atmosphere.

APPLICATIONS
These products should be used in pad or blanket form in your Crossdraft, Downdraft and Semi-Downdraft booth. EC-XL Tack, with light wet tack, should be used for booths with dry overspray.

FEATURES AND BENEFITS
With these overspray media, you will reduce the amount of overspray that exits your booth through the exhaust stack. That means lower maintenance on your stack fan, fewer incidents of paint covered parking lots and neighbors, and compliance with local and federal regulations. The higher holding capacity on our premium media means that those filters last longer and require less frequent changeout. EC and EC-XL have high tensile strength so that your pads and blankets do not fall off the mounting hardware as they load up with paint.

BACK

Air Filter Engineers, Inc. 2002